GIMIDO Basic Enail Version 1.5, Cheap Enail

GIMIDO Basic Enail Version 1.5 for dabbing. It's normal enail for dabbing,Have all basic function for dabbing. Easy to adjust temperature, only push up or down key for adjust temperature. 

This Basic Enail with one coil,ID15.8mm,ID20mm or Flat coil. The flat one is best one, more area to transfer the heat. 

Heat up 710F(Max. Temp 1100F) immediately, only 1 minutes. We use Omron PID, No overshoot for startup(Room Temperature) when you set target temperature 710F. 

Keep stable temperature when dab only drop down little temperature.

If your nails drop more when dabbing, you should adjuest the pid settings.

If you need help, you can contact us, by email: oscoy@gimido.com or KIK(gimido).

Features:

One Temperature Display.

• Actual Temperature(PV)

Simple setup and operation

• Use up and down key to set the target temperature easily.
• Easily set PID settings
• Have Temperature Units options.F or C

Technical specifications

PID Brand

• Omron

Screen size (PID Screen size)

• 48*48mm; 

Screen type

• Digital Screen(Big Screen for Display Actual Temperature)

Display colors

• Red

Connectors and cables
Cable

• 1.8 meters,USA Plug

Connectors

• 5pin normal XLR Plug

Electrical requirements

• Input voltage: 100-240 VAC 50-60Hz
• Maximum power when operating: 250W

Environmental requirements

• Storage temperature: -40° to 116° F (-40° to 47° C)
• Operating humidity: 20% to 80% noncondensing

Size and weight

• Height: 3 inches (75mm)
• Width:  5 inches (127mm)
• Depth: 6.5 inches (165mm)
• Weight: 2.86 pounds (1.3 kgs)

Warranty

• Two Years for Box
• 180 days for Coil

Write a review