GIMIDO Middle Dabs Enail

GIMIDO Middle Dabs Enail. It's Safe enail for dabbing,Have all function for dabbing. Easy to adjust temperature, Just push up or down key for adjust temperature. 

This Middle Dabs Enail with one coil,ID10mm,ID15.8mm,ID20mm or Flat coil. The flat one is best one, more area to transfer the heat. 

Heat up 710F(Max. Temp 1100F) immediately, Less than 1 minutes. No overshoot more(1F to 2F) when you set target temperature 710F for first time.

When the temperature close to 680F, our enails will heat up slowly then reach to 710F. 

If your nails drop more when dabbing, you should adjuest the pid settings.

If you need help, you can contact us, by email: oscoy@gimido.com or KIK(gimido).

Features:

Two  Temperature Display.

• One is Target Temperature(SV)
• One is Actual Temperature(PV)

Simple setup and operation

• Use up and down key to set the target temperature easily.
• Easily set PID settings
• Have Temperature Units options,Fahrenhrit and Degrees Celsius

Technical specifications

Screen size (PID Screen size)

• 48*48mm;

Screen type

• Omron E5CWL_Q1TC digital PID

Connectors and cables
Cable

• 1.8 meters,USA Plug

Connectors

• 4pin or 5pin mini XLR Plug

Electrical requirements

• Input voltage: 100-240 VAC 50-60Hz
• Maximum power when operating: 250W

Environmental requirements

• Storage temperature: -40° to 116° F (-40° to 47° C)
• Operating humidity: 20% to 80% noncondensing

Size and weight

• Height: 2.1 inches (55mm)
• Width:  4.17 inches (106mm)
• Depth: 5.7 inches (145mm)
• Weight: 2.86 pounds (1.3 kgs)

Warranty

• Two Years for Box
• 180 days for Coil

Write a review